Foamy water is usually a result of:
- Excess body oils or detergents in the spa
- Incorrect pH Levels.
- Soft water (low calcium hardness)
- Heavy bather load.
Tips to reduce foam:
- Bathers showering beforehand
- Rinsing swimwear in water to remove excess detergents etc.
- Tying up hair
Proper fix steps:
1. Check your filters are clean and do not need replacing.
2. Bucket out excess foam from surface of water
3. Check your pH/Alkanlinity and Calcium Hardness levels are correct.
4. Increase filter duration time to 4-6 hours per day.
If above steps fail - Add ‘No Foam’ or a similar anti-foam product and run the jet pumps to mix and clean up the water.